Ethernet 10/100 Base T (with bridging
& routing); X.21/V.11 V.35; G.703/G.704
75 ohm & 120 ohm Plug-in modules for standalones, modular
assemblies for rackmount cards.
Connectors
10/100 Base T RJ45; X.21-15 way D; V.35 –
34 way MRAC; G.703/75 ohm – BNC; G.703/120 ohm – RJ45
Diagnostics
m.2100 performance monitoring; built in BERT
with PRBS 511 injection or user specified 8-bit pattern;
in-service test; local loop (X.150 loops 3c); loop back
(loop 2b); remote loop V.54
Timing
Software selected internal or external
Auxiliary Ports
Terminal: RS232 9-way D-type; Alarm (NE only):
13 way DIN (6 in, 2 out)
COPPER SYSTEMS
Transmission
Full Duplex; 512kbps, 768kbps, 1024kbps per
wire pair; or 1536kbps, 2048kbps over one wire pair
Line Codes
2B1Q or CAP (G.SHDSL future option)
Line Requirements
2-wire (EPS-9 in the UK) or 4-wire (EPS-8)
or 1 or 2 unloaded copper twisted pairs
Data Rates
2048kbps (n x 64kbps, n = 1 –32 ) (fractional
G.703 supported)
FIBRE SYSTEMS
Transmission
Full Duplex 1310nm wavelength
Line Codes
5B6B
Fibre Requirements
Single mode or Multi-mode optical fibre versions
Data Rates
2.048Mbps (nx64kbps n = 1 to 32) (fractional
G.703 supported)
Transmission Rates
2.048Mbps
Optical Connectors
FC/SPC & ST – standard options
STANDALONES
Enclosures
ABS high impact plastic outer casing, flammability
UL94 V0
-48V DC (-40 to –57); Mains wide ranging
85 V AC to 250V AC
Power
6.5W maximum dissipation @ 48V DC
Line Connection
DSL: 8-way RJ45 socket on rear of unit; Fibre:
FC/SPC or ST connector at rear of unit
Management
9 way RS232 connection & VT100 (or SNMP/ANMP
via AM-2048 Rack & Network element)
Temperature
- 5 C to + 45 C (degrees)
Weight
1.35kg
Remote Power
Optional Remote Line powering for DSL modems
with special Rackmount Card
AM-2048 RACK – SHELF & CARDS
Enclosure
DIN41494 – 19
inch Rack mounted shelf
Dimensions
Width 482 x Height 356mm x Depth 268mm (OM4x2-Rack
310mm)
* LEDs
Urgent; non-urgent; Test and power
Power Supply
-48V DC (-40 to –57V range); 6A (optional
mains PSU)
Power
220W maximum dissipation (P-MP
& remote powering)
Line Connection
DSL: Front panel 8-way RJ45 socket; Fibre:Front
panel cut out, FC/SPC or ST connector on card
Management
VT100 via 9 way RS232 D-type; ANMP – via
Ethernet 10 Baset T RJ45 port
Humidity
Max 95% relative humidity – non condensing
Temperature
+ 5 C to + 40 C (degrees)
Weight
Shelf 2.8kgs; Card 0.6kgs
Data Rates
2.048Mbps (nx64kbps n = 1 to 32) (fractional
G.703 supported)
* MKII DSL Standalone modems also offer
extra LEDs for: Status, Line 1, Line2, user port.
ORDERING INFORMATION
AM-2048 xDSL 2Mbps Modems
AM-2048A (2B1Q)
MSDSL Rate Adaptive -
64kbps to 2048kbps. Interface - X.21, V.35 or G.703 (75/120ohm).
Power Supply -48VDC. 1 or 2-Pair operation.
AM-2048A (CAP)
MSDSL Rate Adaptive -
64kbps to 2048kbps. Interface - X.21, V.35 or G.703 (75/120ohm).
Power Supply -48VDC. 1 or 2-Pair operation.
AM-2048A-e (2B1Q)
MSDSL Rate Adaptive -
64kbps to 2048kbps. Interface - IP Ethernet 10BaseT & USB
Bridge/Router Module. Power Supply -48VDC. 1 or 2-Pair operation.
AM-2048A-e (CAP)
MSDSL Rate Adaptive - 64kbps
to 2048kbps. Interface - IP Ethernet 10BaseT & USB Bridge/Router
Module. Power Supply -48VDC. 1 or 2-Pair operation.
Fiber Optics - Standalone
AM-2048OA
Fibre Optic - Rates - 64kbps
to 2048kbps. Interface - X.21, V.35 or G.703 (75/120ohm). Power
Supply -48VDC. Single Fibre operation.
AM-2048OA-e
Fibre Optic - Rates - 64kbps
to 2048kbps. Interface - USB & IP Ethernet 10BaseT Bridge/Router
Module. Power Supply -48VDC. Single Fibre operation.
PSU+ Mains Cable
In line 230Vac power supply
for MK I AM-2048 series
AM-2048 xDSL 2Mbps Modems
(For use in AM-2048 Chassis & AM-2048-CO Chassis)
AM-2048B-MR (CAP)
Data Rates - 64kbps to 2048kbps
(2Mbps). Interfaces - X.21 or V.35. 1- Pair operation DPX--Rack;
2-Pair operation DPX--Managed-Rack.
AM-2048B (2B1Q)
MSDSL Rate Adaptive - 64kbps
to 2048kbps. Interface - X.21, V.35 or G.703 (75/120ohm). 1
or 2-Pair operation.
AM-2048B (CAP)
MSDSL Rate Adaptive - 64kbps
to 2048kbps. Interface - X.21, V.35 or G.703 (75/120ohm). 1
or 2-Pair operation.
AM-2048B-e (2B1Q)
MSDSL Rate Adaptive - 64kbps
to 2048kbps. Interfaces - USB and Etherent (IP 10BaseT Interface
with Bridging and Routing capability). 1 or 2-Pair operation.
AM-2048B-e (CAP)
MSDSL Rate Adaptive - 64kbps
to 2048kbps. Interfaces - USB and Etherent (IP 10BaseT Interface
with Bridging and Routing capability). 1 or 2-Pair operation.
Fiber Optics - Rackmounted
AM-2048B-O
Fibre Optic - Rates - 64kbps
to 2048kbps. Interface - X.21, V.35 or G.703 (75/120ohm). Single
Fibre operation.
AM-2048B-Oe
Fibre Optic - Rates - 64kbps
to 2048kbps. Interface - USB & IP Ethernet 10BaseT Bridge/Router
Module. Single Fibre operation.
High Density Shelves
DPX--Chassis-DC
Basic 19 inch shelf, 6U
high, holds 12 Rackmount Baseband modem cards operating on 1-pair,
-48Vdc supply
DPX--Chassis-AC
Basic 19 inch shelf, 6U
high, holds 12 Rackmount Baseband modem cards operating on 1-pair,
240V ac mains supply
DPX--Managed-Chassis -DC
Managed 19 inch shelf, 6U
high, holds 12 Rackmount Baseband modem cards operating on 1
or 2-pairs, -48Vdc supply, VT100 Remote management
DPX--Managed-Chassis -AC
Managed 19 inch shelf, 6U
high, holds 12 Rackmount Baseband modem cards operating on 1
or 2-pairs, 240V ac mains supply, VT100 Remote management
AM-2048-Chassis
19 inch shelf, 6U high,
holds 12 AM-2048 Rackmount cards for copper or optical transmission,
-48Vdc supply, Serial port Remote management
AM-2048-SNMP-Chassis
19 inch shelf, 6U high,
holds 12 AM-2048 Rackmount cards for copper or optical transmission,
-48Vdc supply, SNMP or Ethernet port Remote management
AM-2048-CO-Chassis
Special 8VU high 19 inch
shelf, holds 12 Rackmount cards from AM-2048B and OM4x2B, -48Vdc
supply, Serial port Remote management
Accessories
Interface Adapters
All AM-64/XXXA Baseband
Modem models. Options for X.21, V.24, V.35, V.36, RS530 and
G.703 64kbps co-directional.
Rackmount Modem Interface
cables
Optional spare/replacement
interface cables for Rack mount modems. Options from X.21, V.35,
V.24, RS530, V.36 and G.703 64kbps co-directional.
ABR-Bridge-Router Module
Spare Interface Modules
with Bridge Router functionality for AM-64/128E, AM-64/512
and AM-64/1024 units. IP Ethernet 10baseT interface
AM-2048A-PSU
Power Supply unit 230Vac
for AM-2048A units.
AM-2048 PIMs
Spare Plug-In Module
for AM-2048A - G.703 (75 or 120ohm) Full or fractional.
Spare Plug-In Module for AM-2048A - V.35 (64kbps, nx64kbps
to 2Mbps)
Spare Plug-In Module for AM-2048A - X.21 (64kbps, nx64kbps
to 2Mbps)
e-PIM- Bridge-Router Module
Spare Interface Modules
with Bridge Router function for AM-2048A-O & AM-2048A
units. 10baseT Ethernet AND USB interfaces.
Ethernet NE
Spare Controller Module
for Management of AM-2048-Rack & AM-2048-CO-Rack. Management
via VT100 & Serial port.
Ethernet NE - SNMP
Spare Ethernet port Controller
Module for Network Management for AM-2048-Rack & AM-2048-CO-Rack.
Compatible with ANMP for SNMP management.
SNMP Upgrade
Upgrade of Ethernet NE to
SNMP compatible
AM-2048-Rack-CM
Cable Management tray for
AM-2048-Rack.
OM4x2 BNC
Spare 4 port BNC module
for OM4x2B card. 75ohm G.703 terminations.
OM4x2 Type 43
Spare 4 port BT Type43 module
for OM4x2B card. 75ohm G.703 terminations.
OM4x2 RJ45
Spare 4 port RJ45 module
for OM4x2B card. 120ohm G.703 terminations.
OM4x2-Bat
Battery back up - DC PSU
for OM4x2A standalone unit. Spare.
DPX-7000-SDH 1+1
1+1 Protection option module
for DPX-7000-SDH.
DPX-700-SDH L3
Layer 3 Routing Capability
for Ethernet ports on DPX-7000-SDH
ANMP SW CD
DPX Network Management Platform Installation
CD, SW & Manual. SNMP network Management SW capable of running
on any HW and SW paltform for Management of up to 5000 nodes.